SKU 92021
For technical questions, please call 1-800-444-3353.
Page 3
Warning: The warnings, cautions, and instructions discussed in this in-
struction manual cannot cover all possible conditions and situations that
may occur. It must be understood by the operator that common sense and
caution are factors which cannot be built into this product, but must be
supplied by the operator.
Unpacking
When unpacking, check to make sure the following parts are included. If any
parts are missing or broken, please call Harbor Freight Tools at the number on
the cover of this manual.
Assembly Instructions
1.
Position Upright Brackets (1) six feet apart. Be sure to select the correct
hardware for mounting the Upright Brackets into
solid studs
in the wall. Use
the white plastic Spacer (5) when mounting.
See Figures 1 & 2.
2.
Attach the Endcaps (3) to the ends of the Racks (2). (Not shown).
3.
If boards longer than 8’ are used, it is suggested you purchase a second set
of wall mounted Wood Racks to accommodate that length. Do not exceed the
100 lbs. per shelf limit when Metal Wood Racks are mounted side by side.
A multipurpose storage rack used to hold timber, pipe, or other building materials*.
Can be used in workshops, garages, sheds or etc. Six levels, each level holding no
more than 100 lbs. Each Metal Wood Rack must be secured to a solid wood stud
using 3 screws per
Upright Bracket (1)
.
Recommended hardware is 3” Wood
Screws x 1/4” diameter-Grade 5. (Hardware not included).
*If round materials are stored on the rack they must be tied securely to the rack.
Figure 1
Upright
Bracket (1)
Rack (2)
Endcaps (3)
(not show)
Figure 2
Spacer (5)
Spacer (5)
(on back of
Upright
Brackets)
6
Upright
Bracket (1)
