background image

Page 3

SKU 91899

For replacement parts please call 1-800-444-3353.

9.

Maintain tools with care.  Keep tools clean for better and safer performance. Follow
instructions for lubricating and changing accessories. Inspect tool hoses periodically,
and if damaged, have them repaired by an authorized technician. The handle must be
kept clean, dry, and free from oil and grease at all times.

10.

Disconnect fuel. Disconnect from Propane tank when not in use.

11.

Stay alert.  Watch what you are doing, use common sense. Do not operate any tool
when you are tired.

12.

Check for damaged parts.  Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any
part that is damaged should be properly repaired or replaced by a qualified
technician.

13.

Replacement parts and accessories.  When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this tool. Approved accessories are available from Harbor
Freight Tools.

14.

Do not operate tool if under the influence of alcohol or drugs.  Read warning
labels if taking prescription medicine to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the tool.

15.

Maintenance.  For your safety, service and repairs should be performed regularly only
by a qualified technician.  Maintenance should be performed regularly.

Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.

WARNING: This product, when used with propane for soldering and similar applica-

tions, produces chemicals known to the State of California to cause
cancer and birth defects (or other reproductive harm).
(California Health & Safety Code § 25249.5

 et seq.)

WARNING: The brass components of this product contain lead, a chemical known

to the State of California to cause birth defects (or other reproductive
harm).  (California Health & Safety code § 25249.5, et seq.)

Unpacking

When unpacking, check to make sure the parts listed on page 7 are included.  If any parts
are missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual as soon as possible.

Содержание 91899









Отзывы: