6.
Dress safely. Do not wear loose clothing or jewelry, as they can become caught
in moving parts or come in contact with open flames. Wear a protective hair
covering to prevent long hair from becoming caught in moving parts or coming in
contact with open flames.
7.
Do not overreach. Keep proper footing and balance at all times to prevent
tripping, falling, back injury, etc.
8.
Industrial applications must follow OSHA requirements.
9.
Stay alert. Watch what you are doing at all times. Use common sense. Do not
use this product when you are tired or distracted from the job at hand.
10.
Check for damaged parts. Before using this product, carefully check that it will
operate properly and perform its intended function. Check for damaged parts
and any other conditions that may affect the operation of this product. Check
hose for cracking or other damage. Replace or repair damaged or worn parts
immediately.
11.
Replacement parts and accessories: When servicing, use only identical re-
placement parts. Only use accessories intended for use with this product. Ap-
proved accessories are available from Harbor Freight Tools.
12.
Maintain this product with care. Keep this product clean and dry for better and
safer performance. For your safety, service and maintenance should be per-
formed regularly by a qualified technician.
13.
Use the right tool for the job. Do not attempt to force a small tool to do the
work of a larger industrial tool. There are certain applications for which this tool
was designed. (See General Application section on page 2). It will do the job
better and more safely at the capacity for which it was intended. Do not modify
this tool, and do not use this tool for a purpose for which it was not intended.
14.
WARNING! The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations that may occur. The
operator must understand that common sense and caution are factors, which
cannot be built into this product, but must be supplied by the operator.
SKU 91033
PAGE 3
are impaired while taking drugs. If there is any doubt, do not attempt to use this
product.
5.
Use eye and hand protection. Wear ANSI approved safety impact eye goggles
and flame retardant gloves when using this product. ANSI approved safety
impact eye goggles and flame retardant gloves are available from Harbor Freight
Tools.
