Page 4
SKU 90751
Assembly
Installation
Note:
Stake parts assemble by simply slip-fitting them together.
1. Join Stake 2 (16) to Stake 3 (17). Fit the Lens (15) on the Top Cover (1) by fitting the tabs
on the Lens in the slots on the Top Cover. Insert the tip of Stake 2 (16) into the hole on the
bottom of the Lens (15).
2. Choose a location away from other night time light sources and dig a hole approximately 6
inches in the ground. If the ground is hard, soak it with water prior to digging.
3. Work the pointed tip into the ground without forcing it or hammering it. Forcing or hammer-
ing will break the unit and permanently damage the Solar Rodent Repeller. Fill in the dirt
around the stake and make sure it is stable.
See
FIGURE 1
.
FIGURE 1
Stake 3 (17)
Stake 2 (16)
Lens (15)
Top Cover (1)
Tab
Slot
Switch
90751.p65
10/13/03, 10:46 AM
4
