Harbor Freight Tools 67596 Скачать руководство пользователя

Страница: 1 / 28

Gasoline Powered Pressure Washer

Read this material before using this product. Failure to do so can result in serious injury.

Save thiS manual.

When unpacking, make sure that the product is intact and undamaged.

If any Pressure Washer parts are missing or broken, please call 1-800-444-3353 as soon as possible.

If any Engine parts are missing or broken, please call 1-800-520-0882 as soon as possible.

visit our website at: http://www.harborfreight.com

email our tech support at: [email protected]

email our engine tech support at: [email protected]

2009 by Harbor Freight Tools

or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

Manual Revised 11g

ENGINES

DanGeR

using an engine indoors Can Kill YOu in

minuteS.
engine exhaust contains carbon monoxide. this

is a poison you cannot see or smell.

neveR use inside a

home or garage, even

iF doors and windows

are open.

Only use OutSiDe

and far away from

windows, doors, and

vents.

item 67546

(ePa version) 212cc engine

item 67596

(ePa/CaRB version) 212cc engine

Содержание 67596





























Результаты поиска

Содержание 67596

Отзывы:

Похожие инструкции для 67596

Бренды по названию

Популярные бренды

Harbor Freight Tools 67596, Руководство пользователя

Результаты поиска

Содержание 67596

Отзывы:

Похожие инструкции для 67596

Бренды по названию

Популярные бренды