Page 5
For technical questions, please call 1-800-444-3353.
SKU 67121
SpeciFicatioNS
Electrical
Requirements
120 V~ / 60 Hz
600/900/1500 W
Heat Range
Low: 600W / Med: 900W /
High: 1500W
Settings
Off
Fan
Heat: Low/Medium/High
houSehold uSe oNlY
uNpackiNg
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon
as possible.
Save this manual
Keep this manual for the safety
warnings and precautions, assembly,
operating, inspection, maintenance and
cleaning procedures. Write the product’s
serial number in the back of the manual
near the assembly diagram (or month
and year of purchase if product has no
number). Keep this manual and the
receipt in a safe and dry place for future
reference.
operatioN
read the eNtire ruleS For
SaFe operatioN section at
the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
Note:
For additional information regarding
parts listed, refer to Assembly
Diagram at back of manual.
Figure 1
Switch (26)
Power Light (25)
Heating Coil and Fan
(inside unit)
Make sure the Switch is turned to Off.
1.
Place Heater/Fan on a sturdy, dry
2.
surface, away from any combustible
materials.
Plug into a 120V electrical outlet.
3.
Turn the Switch to the desired setting:
4.
O - Off
a.
b.
- Fan only.
I - Low heat and fan.
c.
II - Medium heat and fan.
d.
III - High heat and fan.
e.
The Power Light (25) turns on when
5.
the switch is at any setting except Off.
When finished using the Heater/Fan,
6.
turn the Switch to Off and unplug the
unit.
Safety Features:
This unit is equipped
with a thermal overload protection
feature which shuts off the unit if the
temperature rises above the highest
setting. This unit also has a safety tip-
over feature which shuts off the unit
should it tip over.
