background image

SKU 66342 

For technical questions, please call 1-800-444-3353. 

Page 3

If necessary, use Brush (6) to clean hair trim-

5. 

mings from exposed Shaver cutting heads.
If necessary, slide old Foil from out of Foil 

6. 

Holder and rinse trimmings off Foil.
If Foil must be replaced, slide the new Foil 

7. 

into Foil Holder so that small hole in the 

center of the Foil slides over small tab in the 

middle of the Foil Holder cross bar.  This will 

hold Foil in place.
Slide the Shaver housing into the Foil Holder 

8. 

until it snaps into place.
Slide the Cover onto Shaver head until ready 

9. 

to use.  
Recharge if necessary.

10. 

remoVInG tHe BatterY

By law, the Ni-Cd battery must be removed 

1. 

from housing before Shaver disposal.
Use a screwdriver to unscrew the Shaver 

2. 

head from the top of the housing.  
Pry off the label from the housing bottom and 

3. 

unscrew bottom from housing.
Pry front panel off Power Switch and remove 

4. 

screw from front panel.
Slide battery holder out of housing.  Remove 

5. 

and properly dispose of Ni-Cd battery. 

parts lIst & dIaGram

part

description

Qty.

1

Shaver

1

2

Foils

2

3

Foil Holder

1

4

Cover

1

5

Charger

1

6

Brush

1

7

Carrying Sleeve

1

8

Power Switch

1

record serial number Here: 
note:

  If product has no serial number, record month and 

year of purchase instead.

note:

  Some parts are listed and shown for illustration 

purposes only, and are not available individually 

as replacement parts.

please read tHe FolloWInG careFullY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED 

THE PARTS LIST AND ASSEMBLy DIAGRAM IN THIS DOCUMENT 

AS A REFERENCE TOOL ONLy.  NEITHER THE MANUFACTURER 

OR DISTRIBUTOR MAKES ANy REPRESENTATION OR WARRANTy 

OF ANy KIND TO THE BUyER THAT HE OR SHE IS qUALIFIED TO 

MAKE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS 

qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT.  IN FACT, THE 

MANUFACTURER AND/OR DISTRIBUTOR ExPRESSLy STATES THAT ALL 

REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN By 

CERTIFIED AND LICENSED TECHNICIANS, AND NOT By THE BUyER.  

THE BUyER ASSUMES ALL RISK AND LIABILITy ARISING OUT OF HIS 

OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT 

PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF 

REPLACEMENT PARTS THERETO.

1

8

2

3

4

6

7

Please note: 

Charger (5) is not shown.

Отзывы: