SKU 66163
For technical questions, please call 1-800-444-3353.
Page 7
pLEASE READ ThE
FOLLOWing CAREFULLY
THE MAnufACTuRER AnD/oR DisTRibuToR
HAS PROVIDED THE PARTS LIST AND ASSEMBLy
DIAGRAM IN THIS MANUAL AS A REFERENCE
TOOL ONLy. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANy REPRESENTATION
OR WARRANTy OF ANy KIND TO THE BUyER
THAT HE OR SHE IS QUALIFIED TO MAKE ANy
REPAIRS TO THE PRODUCT, OR THAT HE OR
SHE IS QUALIFIED TO REPLACE ANy PARTS OF
THE PRODUCT. IN FACT, THE MANUFACTURER
AnD/oR DisTRibuToR ExPREssly sTATEs
THAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN By CERTIFIED AND
LICENSED TECHNICIANS, AND NOT By THE
BUyER. THE BUyER ASSUMES ALL RISK AND
LIABILITy ARISING OUT OF HIS OR HER REPAIRS
TO THE ORIGINAL PRODUCT OR REPLACEMENT
PARTS THERETO, OR ARISING OUT OF HIS OR
HER INSTALLATION OF REPLACEMENT PARTS
THERETO.
problem
possible Cause
possible Solution
Auto Vacuum does not turn on.
No input power.
1.
Vehicle’s battery low.
2.
Blown fuse.
3.
Make sure 12 Volt Power Plug is
1.
properly connected to vehicle’s 12 volt
cigarette lighter outlet.
Make sure vehicle’s battery is fully
2.
charged.
Replace the fuse.
3.
Low or no suction.
Clogged Container and/or nozzle
1.
openings.
Container full.
2.
filter and/or impeller area clogged.
3.
Clean out Container and/or nozzle
1.
openings.
Empty Container.
2.
Clean out filter and/or impeller area.
3.
TROUBLEShOOTing
Record product’s Serial number here:
note:
If product has no serial number, record month and year of purchase instead.
note:
Some parts are listed and shown for illustration purposes only, and are not avail-
able individually as replacement parts.
Cleaning, Maintenance, and
Lubrication
BEFORE EACH USE, inspect the
1.
general condition of the Auto Vac-
uum. Check for misalignment or
binding of moving parts, cracked or
broken parts, damaged electrical wir-
ing, and any other condition that may
affect its safe operation.
AFTER USE,
2.
clean the external
surfaces of the tool with a clean cloth.
Refer to previous instructions for
cleaning the Container (2), Filter Sup-
port (8), Filter (9), and Impeller area.
3.
WARNING! If the 12 Volt Power
Cord/Plug (11) of this Auto Vacuum is
damaged, it must be replaced only by
a qualified service technician.
