Page 6
For technical questions, please call 1-888-866-5797.
Item 62575
Maintenance
Procedures not specifically explained in this manual must be performed
only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1.
BEFORE EACH USE,
inspect the
general condition of the tool. Check for:
a. leaking, swollen, or cracked battery,
b. loose hardware,
c. misalignment or binding of parts,
d. cracked or broken parts, and
e. any other condition that may
affect its safe operation.
2.
AFTER USE,
wipe external surfaces
of the tool with clean cloth.
3. Replace the battery in the Remote
Control when necessary to
maintain proper performance.
4. Replacement parts are not available.
Remote Control Battery Replacement
1. Remove screw(s) and open
battery compartment.
2. Remove battery and dispose of properly.
3. Install new battery in correct
polarity, close compartment
and replace screw(s).
