SKU 40141
For technical questions, please call 1-800-444-3353.
PAGE 5
secure the Upright Panel Supports (part #12) to the three Front Panels (part
#11).
(See Assy. Diagram.)
3.
Repeat Steps #1 and #2 for the remaining
two Upright Panel Supports (part #12)
and remaining
three Rear Panels (part #11).
(See Assy. Diagram.)
To Attach The Front And Rear Sections Of The Side Panel Assemblies:
1.
With assistance, place the ends of
two Side Panel Assemblies (part 10) together.
Next, insert
three Side Panel Plates (part #8) over the three connecting ends of
the two Side Panel Assemblies. Then, secure the three connecting ends of the
two Side Panel Assemblies, using twelve Bolts (part #4), twelve Washers (part
#2), and twelve Nuts (part #3).
(See Assy. Diagram.)
2.
Repeat Step #1 for the remaining two Side Panel Assemblies (part #10).
(See Assy. Diagram.)
To Attach The Latches/Latch Housings To The Side Panel Assemblies:
1.
Locate the four mounting holes at
each end of an uppermost, previously as-
sembled, Side Panel Assembly (part #10). Then secure one Latch/Latch Hous-
ing (parts #9, #13) to each end, using four Bolts (part #4), four Washers (part #2),
and four Nuts (part #3) for each Latch/Latch Housing.
(See Assy. Diagram.)
2.
Repeat Step #1 for the remaining Side Panel Assembly (part #10) and remaining
two Latch/Latch Housings (parts #9, #13).
(See Assy. Diagram.)
To Attach The Latch Plates To The Front/Rear Panel Assemblies:
1.
Locate the four mounting holes at
each end of an uppermost, previously as-
sembled, Front Panel Assembly (part #11). Then secure one Latch Plate (part
#7) to each end, using four Bolts (part #4), four Washers (part #2), and four Nuts
(part #3) for each Latch Plate.
(See Assy. Diagram.)
2.
Repeat Step #1 for the remaining Rear Panel Assembly (part #11) and remaining
two Latch Plates (part #7).
(See Assy. Diagram.)
To Attach The Side Panel Assemblies And Front/Rear Panel Assemblies To The
Utility Trailer:
1.
With assistance, insert the two Upright Panel Supports (part #12) of one Side
Panel Assembly (part #10) into the two mounting slots located on the side of the
