background image

Page 8

For technical questions, please call 1-800-444-3353.

SKU 35559

         35561

oPeratIng InStruCtIonS

CautIon!  

Only use clean equipment and 

utensils.  Before using the Propane 

Stove, and after using this product, 

clean all parts in warm, clean water 

and anti-bacterial soap.  Then, 

thoroughly dry.

note:  

High altitudes affect cooking 

efficiency.

Locate the Propane Stove and 

1. 

propane tank on a clean, dry, level 

surface capable of supporting the 

weight of the Stove, the utensils and 

the propane tank.  Keep the Propane 

Stove and propane tank away from 

other flammable objects.

Check to make sure the Temperature 

2. 

Control Knob (4) on the Propane 

Stove is in its 

“oFF”

 position.  Open 

the gas valve on the propane tank 

and check and smell for gas leaks.  

Perform a bubble test by applying 

warm soapy water over every joint, 

regulator, fitting, and anywhere 

else there may be a possible leak.  

Observe carefully to see if bubbles 

expand, indicating a leak.  A large 

leak can blow the soapy solution 

away instead of forming bubbles.  

If leaks are found, do not use the 

Propane Stove until the leaks have 

been stopped.  After testing, make 

sure to close the gas valve on the 

propane tank. 
For the manual ignition model (SKU 

3. 

35559), open the gas valve on the 

propane tank.  Apply a lighted match 

to the Burner (2) which is to be lit.  

Next, push the Temperature Control 

Knob (4) and turn it counterclockwise 

to its 

“on” 

position.  Once the Burner 

is lit, safely dispose of the match and 

adjust the Temperature Control Knob 

to the desired setting.
For Piezo Electric ignition model 

4. 

(SKU 35561), a Burner (2) can 

be lit by pushing and turning the 

Temperature Control Knob (4) to its 

“on”

 position without having to use a 

match.  Once the Burner is lit, adjust 

the Temperature Control Knob to the 

desired setting.

note:  

 For both models, if the Burner 

does not ignite, turn the Temperature 

Control Knob to its 

“oFF”

 position 

and wait 5 minutes before trying 

again.

 = yellow/orange Flames

 = Blue Flames

Improper Flames 

(yellow Flames)

Proper Flames 

(Yellow tips on the top of the blue flames)

FIgure B

5. 

During each use, 

visually check the 

burner’s flame.  If the flames look 

improper, have the Propane Stove 

serviced by a qualified technician 

before use.  

(See Figure B.)

Содержание 35559











Отзывы: