Page 3
SKU 03343
9.
Maintain tools with care
. Keep tools clean for better and safer performance. Inspect
tool cords periodically, and if damaged, have them repaired by an authorized
technician. The handles must be kept clean, dry, and free from oil and grease at all
times.
10.
Stay alert
. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
11.
Check for damaged parts
. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any
part that is damaged should be properly repaired or replaced by a qualified
technician. Do not use the tool if the trigger does not turn On and Off properly.
12.
Guard against electric shock
. Prevent body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerator enclosures.
13.
Replacement parts and accessories
. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this tool. Approved accessories are available from Harbor
Freight Tools.
14.
Do not operate tool is under the influence of alcohol or drugs
. Read warning
labels if taking prescription medicine to determine if your judgement or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the Timing Light.
15.
Maintenance
. For your safety, maintenance should be performed regularly by a
qualified technician.
Note
: Performance of this tool (if powered by line voltage) may vary depending on varia-
tions in local line voltage. Extension cord usage may also affect tool performance.
Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.
Do not use the Timing Light if any of the wires are frayed or torn.
Warning! Whenever using the Timing Light, make sure your vehicle is in gear or park,
and the emergency brake is engaged. Park your vehicle on a flat, dry, level surface
when doing any vehicle maintenance.
Unpacking
When unpacking, check to make sure the parts listed on page 7 are included. If any parts
are missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual as soon as possible.
