Page 6
SKU 04826
Operation
Warning! Before operation, make sure the Stove is on a flat, level, fire retardant surface
capable of supporting the Stove and the items to be cooked.
1. You do need matches to start the Stove. We recommend using long, fireplace, wooden
matches.
Note: FIGURE 1 on page 5 illustrates which knob controls each burner.
2. Light your match and position the match head so it is almost touching the outlet holes on the
burner, and push in and turn one of the Knobs (#4) to the “To Light and Low “ position, the first
mark moving counterclockwise from the “off” position (see FIGURE 1 on page 5) to light the
Stove. Once it lights, move the Knob (#4) to the desired cooking position. See FIGURE 1 on
page 5. You must light each burner individually.
3. To shut off the stove, turn each Knob (#4) to “Off” (12 o’clock. Turn off the valve on the
propane cylinder.
4. Allow sufficient time for the Stove to completely cool before disconnecting and removing
the propane cylinder.
5. Unscrew the regulator/hose (not included) from the Assembly Valve in a counterclockwise
direction.
Always disconnect the propane cylinder from the Stove when it is not in use.
Maintenance and Storage
See FIGURE 1 on page 5.
1. Clean the Stove with a damp cloth and mild detergent. Dry the Stove.
Do not clean the Stove with corrosive or combustible cleaners.
2. When not in use, the Stove should be stored and locked up in a dry location to inhibit rust.
Always allow sufficient time for the Stove to cool before storing. Keep it out of reach of
children.
3. When storing, the propane cylinder and the regulator/hose must be removed from the
Stove. The propane cylinder and the regulator/hose should be stored indoors in a well venti-
lated area above ground level. Consult your local gas distributor for propane cylinder storage
guidelines.
4. Always make sure the valve on the propane cylinder is in the “Off” position during storage.
Do not perform any maintenance until the Stove has had ample time to cool down.
