11
Lowes.com/harborbreeze
FINAL INSTALLATION
9. Install bulbs (O).
IMPORTANT:
When you need to replace bulbs,
please allow the bulb(s) and glass shade(s) to cool
down before touching them.
Remove hex nut (W) and rubber washer (X) from
threaded rod on light kit fitter (L).
Aligh hole in glass shade (M) with threaded rod and
push up gently on glass shade (M) until threaded
rod comes through hole. Replace rubber washer (X)
and secure glass shade (M) with hex nut (W) and
then finial (CC).
CAUTION:
Do not overtighten hex nut (W) or
finial (CC) as glass may crack or break.
10.
O
10
9
D
M
W
CC
X
L
Threaded
Rod
Finial x 1
Hardware Used
CC
11. Align openings in grooves of wire housing (V)
with small protrusions on the outside of the light
kit fitter (L), then turn wire housing (V) clockwise
until it is secure.
Pull down
gently
on the wire housing (V) to make
sure it is securely attached.
11
Groove
Protrusion
V
L
