background image

5

Energy Efficient Use of Ceiling Fans

Ceiling fan performance and energy savings rely 
heavily on the proper installation and use of the ceiling 
fan. Here are a few tips to ensure efficient product 
performance.

Turn Off When Not in the Room

Ceiling fans cool people, not rooms. If the room is 
unoccupied, turn off the ceiling fan to save energy.

Using the Ceiling Fan Year Round
Summer Season:

Use the ceiling fan in the counter-

clockwise direction. The airflow produced by the ceiling 
fan creates a wind-chill effect, making you “feel” cooler. 
Select a fan speed that provides a comfortable breeze, 
lower speeds consume less energy.

Winter Season:

Reverse the motor and operate the ceiling 

fan at low speed in the clockwise direction. This produces 
a gentle updraft, which forces warm air near the ceiling 
down into the occupied space.Remember to adjust your 
thermostat when using your ceiling fan - additional energy 
and dollar savings could be realized with this simple step!

Electrical and Structural Requirements

Your new ceiling fan will require a grounded electrical 
supply line of 120 volts AC, 60 HZ, 15 Amp Circuit. 
Electrical code requires use of a fan-rated outlet box to 
support the extra weight and motion associated with a 
ceiling fan. A fan-rated box will be labeled as such and 
typically supports up to a 70lb ceiling fan. Fan-Rated 
Outlet Boxes vary in ratings and design. Ensure the 
ratings of your ceiling fan outlet box meet the 
requirements for the ceiling fan being installed. Figure 1,
Figure 2 and Figure 3 depicts different structural 
configurations that may be used for mounting the 
outlet box.

Low-profile use (Figure 1)

A 1 2-in.-deep pancake box is meant to be screwed to a 
joist or block. It’s used if only one cable is coming into 
the box. It is also available in a saddle-mount 
configuration.

CEILING

2" x 4"

CEILING JOIST

OUTLET BOX

Figure 1

Figure 2

2" x 4"

CEILING JOIST

CEILING

OUTLET BOX

Deep-profile use (Figure 2)

A 2-1 -in.-deep box can be attached to blocking 
between joists and is roomy enough to handle more 
than one cable. 

Choosing the Appropriate Mounting Location

Ceiling fans should be installed, or mounted, in the middle 
of the room and at least 7 feet above the floor and 18 
inches from the walls. If ceiling height allows, install the fan 
8 - 9 feet above the floor for optimal airflow. Consult your 
Retailer for optional mounting accessories.

Содержание LP8063



































Отзывы: