13
FINAL INSTALLATION
4. Insert blade arm (R) through slot in the side of the
motor assembly (H). Align the holes of one blade arm
(R) with three motor screw holes in underside of the
motor assembly (H). Secure with three motor screws
(XX). Repeat this step for the remaining blade arms
(R).
Hardware Used
XX
Motor Screw
x 15
5.
Remove one and loosen the other two fitter plate
screws (L) but do not remove from fitter plate (K).
Feed the 6-pin connector through center hole in light
pan. Align the two keyhole slots in the light pan (M)
with the loosened fitter plate screws (L). Place the
light pan (M) over the two screws and turn the light
pan (M) clockwise. Then tighten the two fitter plate
screws (L). Re-install the fitter plate screw (L) that
was removed in the previous step and tighten firmly.
6. Remove one and loosen the other two light pan
screws (N) from the underside of the light pan (M).
Connect the 6-pin connector from the fitter plate (K)
to the 6-pin connector from the light kit (O). Align the
keyhole slots in the light kit (O) with the loosened
screws in the light pan (M). Turn light kit (O) clockwise
and replace the previously removed light pan screw
(N). Tighten all screws.
4
H
O
N
M
L
M
K
R
X
5
6
6-pin
Connector
6-pin
Connector
Keyhole
Slot
Keyhole
Slot
