background image

19

LIMITED LIFETIME WARRANTY

The manufacturer warrants this fan to be free from defects in workmanship and materials present at 

time of shipment from the factory for a lifetime from the date of purchase by the original purchaser. 

The retailer also warrants that all other fan parts, excluding any glass or plastic blades, to be free 

from defects in workmanship and material at the time of shipment from the factory for a period of one 

year after the date of purchase by the original purchaser. The manufacturer agrees to correct such 

defects without charge or at its option replace the ceiling fan with a comparable or superior model.
To obtain warranty service, present a copy of the receipt as proof of purchase. All costs of removing 

and reinstalling the product are your responsibility. Any damage to any part such as by accident or 

misuse or improper installation or by affixing any accessories, is not covered by this warranty. The 

manufacturer assumes no responsibility whatsoever for fan installation during the limited lifetime 

warranty. Any service performed by an unauthorized person will render the warranty invalid.

Due to varying climate conditions, this warranty does not cover any changes in brass finish, including 

rusting, pitting, corroding, tarnishing or peeling. Brass finishes of this type give their longest useful life 

when protected from varying weather conditions. Any glass provided with this fan is not covered by 

the warranty.

Any replacement of defective parts from the ceiling fan must be reported within the first year from the 

date of purchase. For the balance of the warranty, call our customer service department for return 

authorization and shipping instructions so that we may repair or replace the ceiling fan. Any fan or 

parts returned improperly is the sole responsibility of the purchaser. There is no other expressed 

warranty. The manufacturer disclaims any and all warranties. The duration of any implied warranty 

which cannot be disclaimed is limited to the time period as specified in the expressed warranty. The 

manufacturer shall not be liable for incidental, consequential, or special damages arising out of or 

in connection with product use or performance except as may otherwise be accorded by law. This 

warranty gives specific legal rights, and you may also have other rights which vary from state to state.

This warranty supersedes all prior warranties.

Note:

 A small amount of “wobble” is normal and should not be considered a defect.

Содержание CANTLEY 41557





















Отзывы: