background image

20

LIMITED LIFETIME WARRANTY

Printed in China

JMLI1803

The distributor warrants this fan to be free from defects in workmanship and materials present at time of 
shipment from the factory for Lifetime limited from the date of purchase.  This warranty applies only to the 
original purchaser. The distributor agrees to correct any defect at no charge or, at our option, replace the 
ceiling fan with a comparable or superior model.

To obtain warranty service, present a copy of your sales receipt as proof of purchase.  All cost of removal 
and reinstallation are the express responsibility of the purchaser.  Any damage to the ceiling fan by 
accident, misuse or improper installation, or by using parts not produced by the manufacturer of this fan or 
affixing accessories not produced by the manufacturer of this fan, are the purchaser's own responsibility.  
The distributor assumes no responsibility whatsoever for fan installation during the limited lifetime warranty.  
Any service performed by an unauthorized person will render the warranty invalid.

Due to varying climatic conditions, this warranty does not cover changes in brass finish, rusting, pitting, 
tarnishing, corroding or peeling.  Brass finish fans maintain their beauty when protected from varying 
weather conditions.  Any glass provided with this fan is not covered by the warranty.

Any replacement of defective parts for the ceiling fan must be reported within the first year from the date of 
purchase.  For the balance of the warranty, call our customer service department (

at 

1-800-643-0067)

 for 

return authorization and shipping instructions so that we may repair or replace the ceiling fan.  Any fan or 
parts returned improperly packaged is/are the sole responsibility of the purchaser.  There is no further 
express warranty.  The distributor disclaims any and all implied warranties.  The duration of any implied 
warranty which cannot be disclaimed is limited to the limited lifetime period as specified in our warranty.  
The distributor shall not be liable for incidental, consequential or special damages arising at or in 
connection with product use or performance except as may otherwise be accorded by law.  This warranty 
gives you specific legal rights and you may also have other rights which vary from state to state.  This 
warranty supersedes all prior warranties.

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department at 

1-800-643-0067

, 8 a.m. - 6 p.m., EST, 

Monday - Thursday,  8 a.m. - 5 p.m., EST, Friday.

A

B

C

G

I

 A  Downrod
 B  Canopy
 C  Mounting 

Bracket

 G  Blade 
 J  Blade 

Arm

 

Switch Housing Cap

DESCRIPTION

PART

PART #

0995853-A
0995853-B
0995853-C
0995853-G
0995853-J
0995853-M

J

M

Содержание CAF48BNK5L





















Отзывы: