WIRING
10
Lowes.com/harborbreeze
1.
1
WHITE SUPPLY WIRE
BLACK SUPPLY WIRE
BLACK
BLACK
WHITE
WHITE
BLACK
AC IN L
WHITE
AC IN N
WHITE
GROUND (GREEN
OR BARE)
FROM FAN
FROM
RECEIVER
ANTENNA
FROM
CEILING
BLACK
FROM
RECEIVER
J
3
Gently slide remote control receiver (J) smooth side
up into mounting bracket (C). Turn spliced/taped
wires upward and gently push wires and wire
connectors (AA) into outlet box. Let antenna from
remote control receiver (J) hang to the side.
NOTE:
The remote control included with this fan
meets the following requirements:
a.
Not for use with solid state fans.
b.
Electrical rating: 120V / 60 Hz;
motor amps:1.5 MAX.
Should you choose to use a different remote control
with this fan, it must also meet these same
requirements
3.
Wrap electrical tape around each individual wire
connector (AA) down to the wire.
WARNING:
Make sure no bare wire or wire
strands are visible after making connections. Place
green and white connections on opposite side of
box from the black connections.
Turn spliced/taped wires upward and gently push
wires and wire connectors (AA) into outlet box.
2.
2
AA
AA
AA
Hardware Used
E3 Wire Connector
x 6
AA
Antenna
A
J
C
BLUE
BLUE
Make the necessary wiring connections for remote
control operation according to Fig. 1. For each wire
connection, use one of the wire connectors (AA),
making sure to screw wire connector (AA) on in a
clockwise direction. [Make sure to connect
all GROUND (GREEN) wires together from fan (on
downrod (A) and mounting bracket (C)) to
BARE/GREEN wire from ceiling.]
NOTE:
Assistance from another person is
recommended for this step.
