Secure mounting bracket (C) to outlet box (not
included) using screws, spring washers and flat
washers provided with the outlet box.
*
NOTE: It is very important you use the proper
hardware when installing the mounting bracket
(C) as this will support the fan.
IMPORTANT:
If using the angle mount, make
sure open end of mounting bracket (C) is
installed facing the higher point of the ceiling, and
ensure the ceiling angle is not steeper than 19°.
4b.
INITIAL INSTALLATION
7
5. Remove motor screws (I) and lock washers (K)
from underside of motor housing (D). [If there are
plastic motor blocks installed with the motor
screws (I) and lock washers (K), discard the
plastic motor blocks.]
For
DOWNROD-STYLE FAN MOUNTING
,
proceed to Step 1 on the following page. For
CLOSEMOUNT-STYLE FAN MOUNTING
, skip to
page 10.
K
I
5
D
Plastic Motor Block
4a. Loosen canopy mounting screws (L) in slotted
holes of canopy (B) and remove the other two
canopy mounting screws (L) and star washers
(O). Save for
later
use.
Remove mounting bracket (C) from canopy (B).
B
L
O
4a
C
Open End
4
C
C
ANGLE MOUNT
STANDARD
MOUNT
4b
