INITIAL INSTALLATION
4. Loosen canopy mounting screws (N) in slotted
holes of canopy (C) and remove the other two
canopy mounting screws (N); save for later use.
Remove mounting bracket (B) from canopy (C).
4
B
C
N
N
7
2. Determine mounting method to use.
A.
Downrod mount (standard or angled ceiling).
B.
Closemount (standard ceiling only).
IMPORTANT
: If using the angle mount, check to
make sure the ceiling angle is not steeper than 19°.
*Helpful Hint
: Downrod-style mounting is best
suited for ceilings 8 ft. or higher. For taller ceilings
you may want to use a longer downrod (not
included). Angle-style mounting is best suited for
angled or vaulted ceilings. A longer downrod is
sometimes necessary to ensure proper blade
clearance. Closemount mounting is more suitable
for ceilings lower than 8 ft. high.
Check to make sure blades (I) will be at least
30 inches from any obstruction. Check
downrod (A) length to ensure blades (I) will be
at least 7 ft. above the floor.
3.
A
B
19° max.
7 ft.
min.
30 in.
min.
I
2
3
