5
Lowes.com/harborbreeze
ASSEMBLY INSTRUCTIONS
2. Remove the three switch housing screws and
switch housing (Fig. 2a) or switch housing cap
(Fig. 2b) from the existing fan. If applicable,
disconnect the plugs located inside the switch
housing.
3.
Use a screwdriver (not included) to push out the
plug button from either the switch housing (Fig. 3a)
or the switch housing cap (Fig. 3b).
Switch
Housing
Switch
Housing
Switch
Housing
Plug Button
Plug Button
Switch
Housing
Cap
Switch
Housing Cap
Switch
Housing
Cap
Switch
Housing
Screw
Switch
Housing
Screw
H
H
A
A
I
I
4. Remove the hex nut (H) and lock washer (I) from
the rod on the top of the light kit (A). Gently feed
the wires from the light kit (A) through the hole in
the center of the switch housing (Fig. 4a) or switch
housing cap (Fig. 4b). Thread the rod from the light
kit (A) into the switch housing or switch housing
cap. Then thread the wires through the lock washer
(I) and hex nut (H) and tighten the hex nut (H) and
lock washer (I) to secure the light kit to the switch
housing or switch housing cap.
4a
4b
2a
2b
3b
3a
