14
OPERATING INSTRUCTIONS
1 . To operate the fan using the remote from remote pack
(Q), press and release the following buttons:
III
- High speed
II
- Medium speed
I
- Low speed
Fan Off
- Turns power to fan off .
Light Delay
- Tap the light delay button, which will
turn off the light after one minute . Tap the light control
button to exit light delay mode .
Light Control
- Tap the light control button to turn the
light off and on . Press and hold light control button to
dim or brighten the lights .
Seasonal Slide Switch - In warmer weather,
push the
seasonal slide switch left toward sun icon, which will
result in downward airflow creating a wind chill effect.
In cooler weather,
push the seasonal slide switch right
toward the snowflake icon, which will result in upward
airflow that can help move hot air off the ceiling.
Important:
Wait for the fan to stop before moving
the seasonal slide switch . The seasonal slide switch
must be set either completely left or right in order
for the fan to function correctly . If the switch is set in
the middle position, the fan will not operate .
Low Battery Indicator
- LED Indicator will flash for
one minute as a reminder to replace the 12-volt battery .
2 . Remove battery door from back off the remote from
remote pack (Q) to access the following:
D/CFL Switch
- set to “D” at the factory . The switch
should remain in the “D” position to ensure the halogen
bulb is dimmable .
LEARN
- Syncs remote to receiver (see
troubleshooting for instructions) .
1
2
High Speed
Led Indicator
Medium Speed
Low Speed
Fan Off
Light Delay
Light Control
Reverse Switch
Battery Compartment
(battery door removed)
D
CFL
LEARN
