6
ASSEMBLY INSTRUCTIONS
5.
The frequency switches on your receiver and
transmitter have been preset at the factory. Remove
the transmitter battery cover and make sure the
switches are set to the same position. This must be
done so that your fan will communicate properly. If
you are using more than one fan in the same area
and want to control them separately, change one
fan’s dip switch settings in the transmitter and
remote to a new pattern.
NOTE: If not using for long periods of time, remove
battery to prevent damage to transmitter. Store the
remote away from excessive heat or humidly.
4.
For Canadian installation and for USA fans over 35
lbs, the safety cable must be installed into the house
structure beams using a 3” lag screw (CC). Make
sure that when the safety cable is fully extended the
lead wires are longer than the cable and no stress is
placed on the lead.
Lowes.com/harborbreeze
4
Safety
Cable
Safety
Cable
Safety
Cable
CC
DD
BB
R
5
Q
