Harbor Breeze 2599777, Быстрый старт

Страница: 9 / 18

1. After wire connections, take the motor assembly (B)
off the hook.Raise the motor assembly (B) up to the
ceiling plate (A).Align two remained screws (I) on the
motor assembly (B) to the keyholes on the ceiling
plate (A), rotate clockwise until the screw heads
engage the keyhole slots fully. Make sure not to
break any wire connections.
2. Re-install two mounting screws (I) to the round holes,
securely tighten four (4) mounting screws (I).
9
FINAL INSTALLATION INSTRUCTIONS
11
2
A
A
I
I
B
3. Lift the trim ring (H) up, aligning four notches on the
canopy of motor assembly (B) with raised areas on the
inner side of trim ring (H) and pop it into the canopy.
3
Canopy
A
H