12
FINAL INSTALLATION
7. Install the blade arm (H) to the underside of the
motor assembly (C) with motor screws (N) previously
removed (Step 4, page 8). Tighten with Phillips
screwdriver (not included). Repeat for each blade arm
(H).
Note:
The notch in the fitter plate allows a Phillips
screwdriver (not included) access to motor screws.
8. Remove the three fitter plate screws (L) from the fitter
plate (M). Connect the single-pin connectors from the
motor assembly (C) to the single-pin connectors from
the light kit (E) -- blue to blue and white to white.
9. Secure the light kit (E) to the fitter plate (M) by
reinstalling the fitter plate screws (L).
9
E
L
7
H
N
L
M
E
C
M
8
Notch
Single-pin Connector
