5
Lowes.com/harborbreeze
SAFETY INFORMATION
WARNING:
Do not install or use the fan if any part is damaged or missing.
WARNING:
To reduce the risk of fi re, electrical shock, or personal injury, wire connectors
provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from
the fan. If your house wire is larger than 12 gauges or there is more than one house wire to connect
to the two fan lead wires, consult an electrician for the proper size wire connectors to use. Before
cutting, drilling or hammering, verify the wires location. If needed, contact your electrician, plumber or
service person.
WARNING:
To Reduce The Risk Of Fire, Electric Shock, Or Personal Injury, Mount To Outlet Box
Marked ‘Acceptable for Fan Support of 15.9 kg (35 lbs) or less’ And Use Mounting Screws Provided
With The Outlet Box and/or Support Directly From Building Structure. Most Outlet Boxes Commonly
Used For The Support of Luminaires Are Not Acceptable For Fan Support And May Need To Be
Replaced. Consult A Qualifi ed Electrician If In Doubt.
WARNING:
To reduce the risk of fi re or electric shock, do not use this fan with any solid-state
speed control device.
WARNING:
This fan is to be used in dry locations only.
WARNING:
Before servicing or cleaning the unit, switch power off at the service panel and lock
the service disconnecting means to prevent power from being switched on accidentally. When the
service disconnecting means cannot be locked, securely fasten a prominent warning device, such as
a tag, to the service panel.
CAUTION:
Read all instructions and safety information before installing the new fan. Review
accompanying assembly diagrams.
PREPARATION
Before beginning the assembly of this product, ensure that all parts are present. Compare all parts
with the package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
After opening the top of the carton, remove the mounting hardware package from the foam inserts,
then remove the motor from the packaging and place it on a soft surface, such as a carpet, to avoid
damage to the fi nish.
Estimated Assembly Time:
60 minutes
Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, 1/4 in. Flathead
Screwdriver, Pliers, Safety Glasses, Step Ladder, and Wire Strippers
Helpful Tools (not included): AC Tester Light, Tape Measure, Wiring Handbook, and Wire Cutters
