5
www.harbingerproaudio.com
MULTIPURPOSE
LOUDSPEAKERS
TM
QUICK START GUIDE
SETTING UP / HELPFUL TIPS
• Position the VâRi speaker in the desired location, and ensure the
speaker is stable.
• Make certain the Power Switch is off.
• Make certain Input Gain 1 & 2, and Master Volume are down.
MAKING THE CONNECTIONS
• Plug connections to Input 1. Make certain the Mic/Line switch
matches the source (Mic for microphones and instruments, Line for
mixers, keyboards, or instruments with active pickups).
• Plug connections to Input 2 Note input 2 is a Line Input, and will
not work well with a microphone.
• Plug connection to Aux In on MP3 player or computer.
POWERING UP
• Turn on the power to any devices plugged into Input 1, Input 2,
or Aux Input.
• Power ON the speaker.
• Slowly turn the Master Volume to 12 o’clock.
• Slowly turn up the volume of the MP3 player to the desired level.
• Slowly turn Input 1 to the desired level.
• Slowly turn Input 2 to the desired level.
CLIP LIGHT
• If the Clip Light is constantly turning RED, one of the input signals
is too high.
• Turn down the input signal that is distorting.
FLOOR MONITOR APPLICATIONS
• Turn the Low EQ down slightly to reduce unwanted rumble and
low-frequency build-up. This will reduce feedback and make
vocals clearer.
LINKING MULTIPLE SPEAKERS
• If linking multiple speakers, plug the Line OUT connection of
Speaker 1 to the Line In connection of Speaker 2, and continue
the daisy chain to the last speakers (this is common where multiple
monitor mixers share the same feed from the mixing board.
• Turn the Power On in the order of the audio signal to prevent
unwanted “pops”. First On / Last Off.
VâRi Series speakers can be used as Main Speakers or
Monitor Speakers.
Speaker stand not included
