Harbinger V2212, Руководство пользователя

Страница: 5 / 8

TM
POWERED LOUDSPEAKERS
V2212 & V2215
5
V2212 and V2215 Owner's Manual
QUICK START GUIDE
SETTING UP / HELPFUL TIPS
• Position the VâRi speaker in the desired location, and ensure the
speaker is stable.
• Make sure the Power Switch is OFF.
• Make certain Input Gain 1 & 2, and Master Volume are down.
MAKING THE CONNECTIONS
• Plug connections to Input 1. Check that the Mic/Line switch
matches the source (Mic for microphones and instruments, Line for
mixers, keyboards, or instruments with active pickups).
• Plug connections to Input 2. Note that Input 2 is a Line Input, and
will not work well with a microphone.
• Plug connection to Aux In on mobile audio device or computer.
POWERING UP
• Turn on the power to any devices plugged into Input 1, Input 2, or
Aux Input.
• Power ON the speaker.
• Slowly turn the Master Volume to 12 o’clock.
• Slowly turn up the volume of the mobile audio device to the
desired level.
• Turn Input 1 to the desired level.
• Turn Input 2 to the desired level.
CLIP LIGHT - LOCATED ON FRONT BEHIND GRILLE
• The SIG/CLIP LED will light up BLUE when the speaker is receiving
a signal. If it is distorting, the LED will turn RED and the MASTER
VOLUME should be turned down.
FLOOR MONITOR APPLICATIONS
• Turn the Low EQ down slightly to reduce unwanted rumble and
low-frequency build-up. This will reduce feedback and make
vocals clearer.
LINKING MULTIPLE SPEAKERS
• If linking multiple speakers, plug the Line OUT connection of
Speaker 1 to the Line In connection of Speaker 2, and continue
the daisy chain to the last speaker. (This is common where multiple
monitor mixers share the same feed from the mixing board.)
• Turn the Power On in the order of the audio signal to prevent
unwanted “pops”. First On / Last Off.
VâRi Series speakers can be used as Main Speakers
or Monitor Speakers.
Speaker stand not included
Main
Monitor