Harbinger LV7 Скачать руководство пользователя

Страница: 3 / 9

LV7

OWNER’S MANUAL

LV7

OWNER’S MANUAL

QUICK START GUIDE: LV7

SETTING UP / HELPFUL TIPS

• Make sure the Power Switch is set to the off position
• Plug the included power supply into an AC power outlet and into to the

power input on the rear panel of the mixer

INPUT CONNECTIONS

Choose any combination of the following sources:

• MICROPHONE -

Connect a microphone to the XLR combo input jack via

XLR or 1/4” cable

• PHONE/TABLET/LAPTOP -

Connect a tablet, phone or laptop to the

CH 6|7 STEREO input jack on the mixer via stereo
3.5 mm TRS cable

• GUITAR/BASS -

Connect a guitar or bass with a passive pickup to the

channel 2|3 L/MONO input via standard 1/4” guitar cable

BLUETOOTH

AND AUDIO INPUT

OUTPUT CONNECTIONS
• HEADPHONES

- Connect a pair of headphones to the mixer’s 1/4”

headphone jack

• POWERED SPEAKERS

- Connect the MAIN OUTS on the LV7 to a pair of

powered speakers via XLR cable

POWERING UP

• Power on any devices connected to input jacks
• Power on the LV7
• Power on the powered speakers connected to the LV7’s MAIN OUTS

SETTING LEVELS
• MICROPHONE -

If you have connected a condenser microphone, press the 48V switch (the 48V LED will come on). If you have connected a dynamic

microphone, the 48V switch should be in the off position with the 48V LED off. If you experience too much “boominess” or bass in the microphone signal,
set the 80Hz HPF button to the on position. While speaking or singing into the connected microphone, slowly bring up the channel 1 GAIN control until only the
loudest input briefly triggers the channel 1 CLIP indicator LED. Reduce the GAIN control slightly from this level. Continue speaking or singing into the connected
microphone and slowly bring up the CH 1 level control to the 12 o’clock position, then slowly bring up the MAIN level control until a comfortable
listening level achieved.

CAUTION:

Leave the 48V phantom power switch turned off if phantom power is not required. In order to prevent noise and possibly damaging

connected devices please follow these instructions:

•

Leave 48V phantom power off when connecting a device that does not require it

•

Do not plug or unplug any connections to CH1 of the LV7 when 48V phantom power is on

•

Before turning on or off 48V phantom power make sure the CH1 level control is turned all the way down (to the left-most position)

• PHONE/TABLET/LAPTOP -

Press play on the connected audio player and increase the player’s internal volume control to maximum level. Slowly bring

up the BLUETOOTH / CH 6|7 STEREO level control to the 12 o’clock position, then, slowly bring up the MAIN level control until a comfortable listening
level is achieved.

• GUITAR -

Make sure the channel 2|3 GUITAR HI-Z switch is set to the on position. While strumming the guitar, slowly bring up the MAIN level control until a

comfortable listening level is achieved.

• POWERED SPEAKERS -

To monitor through powered speakers, slowly bring up the MAIN level control until a comfortable listening level is achieved

• HEADPHONES -

Since the headphone level control is independent from the MAIN level control, first ensure that the channel level controls are set so that ample

signal is feeding the main and headphone buses. The meters should show b3 and +5 dB with the MAIN level control at the 12 o’clock position.
When this is accomplished, slowly bring up the headphone level control until a comfortable listening level is achieved.

The mixer powers up with Bluetooth off. Press the PAIR button to initialize Bluetooth and activate pairing (the PAIR LED will flash, indicating that it is ready to pair).
The LV7 will automatically reconnect to the previous Bluetooth audio source if it is available, and will otherwise be available for Bluetooth pairing from a source
audio device such as a smartphone.

If connecting for the first time, look for and select “Harbinger Mixer” on your Bluetooth audio source device.

The PAIR LED is lit solid when currently paired, blinking when available for pairing, and off if Bluetooth has been disabled by pressing and holding the PAIR button,
or when the mixer first powers up.

Pressing the PAIR button when a pairing is active forces any currently connected Bluetooth audio source to disconnect, and makes the mixer available for pairing.

See Bluetooth Troubleshooting section in case of difficulty.

Phone/Tablet/

Laptop

Headphones

Guitar/Bass

Phantom Power

Microphone

Powered Speakers

Connect the included
power supply here

CHECK KNOBS AND SWITCHES

• Turn all white-capped level knobs to the minimum (full counter-clockwise) position

These are the CH1 GAIN and level controls and the MAIN and headphone level controls.