Harbinger L2404FX-USB LvL series, Руководство пользователя

Страница: 18 / 24

18
L2404-USB
USB MIXER
L2404FX-USB Owner's Manual
EFFECTS PRESET CHART
To Playback Audio
1. Connect your computer to the mixer with a USB cable. Your computer should see the mixer as a device labeled “USB Audio Codec”.
2. Select the mixer to playback audio from your system control panel.
3. Playback audio from your application.
4. Channels 11/12 are the playback channels for USB audio. Press the USB source button on this channel so that audio will playback.
When the button is off, this channel will take its input from the microphone preamp or left and right ¼” inputs
5. If you don’t hear any audio make sure the fader for the channel is up as well as the main fader.
To Record Audio
1. Connect your computer to the mixer with a USB cable. Your computer should see the mixer as a device labeled “USB Audio Codec”.
2. Select the mixer to playback and record audio from your system control panel.
3. Setup your mixer to have audio coming in as you normally would.
4. Start up your DAW application on your computer
5. Make sure your DAW application is setup to receive audio from the USB Audio Codec (the mixer)
6. Create an audio track on your mixer and enable it to record. To avoid a feedback loop turn down the fader on channel 11/12 or
switch the USB source button to off.
7. Perform your audio on the mixer and record the track on your DAW application.
8. After recording you can play back the track from your computer to the mixer to hear the playback. Be sure to enable the USB input
on the mixer or bring up the fader if you pulled it down when recording.
RECORDING AND PLAYING BACK
AUDIO THROUGH USB
TROUBLESHOOTING
Preset Name Variable Parameter Tap Control Description
1 CHORUS Depth, Speed Wav Shape Tri/Sine Chorus ensemble effect with short delays
2 FLANGER Depth, Res Oscillation Speed Classic stereo flanger with a slow sweep
3 PHASER Depth, Res Oscillation Speed Modulated sweeping effect
4 TREMOLO Depth Oscillation Speed Rapid reiteration of a note producing
prominent overtones
5 DELAY Feedback, Mod Delay Time Simple mono delay, great for vocals and guitars
6 ECHO Time, Damp Delay Time Classic echo effect. Reflection of sound
7 RV-ROOM 1 Time, Pre Delay Dampening Bright/Dark Emulates a small studio room, great for adding
ambience to drums and instruments
8 RV-ROOM 2 Time, Pre Delay Dampening Bright/Dark Emulates a large studio room, great for adding
ambience to drums and instruments
9 RV-CHAM Time, Pre Delay Dampening Bright/Dark Gives the sound of a classical chamber, ideal
for string, and wind instruments
10 RV-THEAT Time, Pre Delay Dampening Bright/Dark Gives the sound of a large theatre, great for
adding ambience to instruments and vocals
11 RV-HALL Time, Pre Delay Dampening Bright/Dark Gives the sound of a concert hall, ideal for
keyboards, string, and wind instruments
12 RV-CHURCH Time, Pre Delay Dampening Bright/Dark Gives the sound of a Church, ideal for
keyboards, string, and wind instruments