APS15
www.harbingerproaudio.com
1. MIC Inputs - Two MIC input pairs. Each one accepts a high-impedance ¼” jack and / or a low-impedance
XLR connection. For best results, use a low-impedance microphone and a properly wired cable.
2. LINE Input - Accepts line-level signals through the Dual RCA jacks or the single XLR connector.
3. LINE Out - Sends signal out before the power amp, for connection to another active speaker or any other
device that accepts a line level signal.
4. Power Switch - Switches the unit on or off. Be sure to turn the MASTER level down before you turn the
unit on.
5. FUSE & AC - This is a power socket with the FUSE holder.
Back Panel
3
1
2
3
4
5
CAUTION:
FIRE, REPLACE FUSE WITH THE SAME
TYPE AND RATING. DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE.
HOUSEHOLD USE ONLY
TO REDUCE THE RISK OF
MODELS:
FUSE:
AC~: 110V/120V~50/60Hz
APS15(S15QP-C)
T2A 250V
285VA MAX
AVIS: Ne pas ouvrir l'appareil!
Danger de décharge électrique!
