6
Assembly Instructions
Read and precisely follow all installation instructions provided before installing the
Harbinger
®
Pullup.
Failure to properly install the Harbinger Pullup
could result in serious personal injury,
death and/or property damage. Do not install the Harbinger Pullup unless you are
able to install it properly and without damaging your doorway. After installing the
Harbinger Pullup and before exercising, check to make sure it has been properly
installed and can support your full weight by hanging on the bar with your feet just a
few inches off the floor. The Harbinger Pullup is designed for installation on up-to-
building-code, wood-frame doorways between 27 inches and 36 inches (68 – 90 cm)
wide. Do not use if you weigh over 220 lbs. / 100kg. Any other use or misuse may
result in serious personal injury, death and/or property damage. If your anticipated
installation location or use does not meet these criteria, you may return Harbinger
Pullup for up to 90 days from the date of purchase.
Disclaimer
Harbinger Fitness is not responsible for serious personal injury, death and/or property
damage that may occur as a result of the installation, removal, modification, use or
misuse of the Harbinger Pullup. As with any exercise routine, you should consult
with a physician before using the Harbinger Pullup, particularly if you are pregnant
or have any existing injuries. If you have any questions about installing or using of the
Harbinger Pullup, please contact our customer service department at help@4implus.
com.
LAY OUT THE PARTS of your Harbinger Pullup unit as shown below and on the
following page to familiarize yourself with the parts for easier assembly.
Bar
Wrench w/ Phillips
Screwdriver
Phillips Screw (8)
Bolt
Left
J-Hook
Left
Swing
Arm
Right
Swing
Arm
Right
J-Hook
Side
Bracket (2)
3mm
Allen Wrench
5mm
Allen Wrench
