HARBEN CENTURY, Руководство по обслуживанию

Страница: 80 / 83

Flowplant Century Pump Manual
5.2 LIMITATIONS OF THE WARRANTY
The new product and spare parts warranty is limited to defects in material or
workmanship of the product. It does not cover loss of time, inconvenience,
property damage or any consequential damages. Repair or replacement of
the product is your exclusive remedy.
Our liability under this clause shall be in lieu and to this exclusion of any
warranty or conditions implied or expressed by law as to the quality or fitness
for purpose of any goods supplied hereunder PROVIDED THAT nothing in
this clause shall operate so as to exclude liability for death or personal injury
arising from the negligence of the company or its employees.
Our obligations as aforesaid shall constitute the full extent of our liability in
respect of any loss or damage sustained by the purchaser whether caused by
any breach of this contract or by our negligence or otherwise and we shall not
be liable to make good or pay for loss of use of the goods, loss of revenue,
loss of profit or goodwill or any direct or consequential losses howsoever
caused and the purchaser undertakes to indemnify us against any such
claims against us by third parties.
On order to comply with the provision of the Health and Safety at work etc.,
Act 1974 in respect of articles manufactured, supplied or installed for use at
work we test all our products before they leave our factory and supply them
with adequate instructions for their proper use. Further copies of these
instructions are available from us upon request.
5.2.1 Non Warranty Items
The Warranty terms are a precise statement of Flowplant Group Ltd's intention to
cover the replacement or repair cost, on a standardised and agreed basis, of any
product failure resulting from defective material or sub-standard workmanship during
the manufacturing process.
The following items are considered to be of a Maintenance nature and should not be
subject of a claim.
Engine (Manufacturers Warranty Applies)

Routine servicing of injector/fuel injection equipment.

Heavy fuel consumption rectified by engine adjustment.

Adjustment of fan belts/throttle and controls.

Tightening of all sump and cover bolt/nuts water connections and exterior
oilpipes and filter bolts.

Filters and the cleaning of filters.

Engine service components.

Adjustments.
77