3
Страница 1: ...he top side of the circuit board a GRAY wire and a YELLOW wire from the top side of the board these wires pass through the hole in the circuit board the 3 4 7MΩ resistor assembly on the bottom of the circuit board and the heavy BLUE HV wire on the bottom side of the board Remove the fixed end of the 3 4 7MΩ resistor assembly from the terminal strip lug and discard these resistors Remove the 9 6 32...
Страница 2: ...Place the amplifier upside down Locate the 2 lug terminal strip just to the rear of the new circuit board Remove the 15KΩ resistor and clean the holes in the terminal strip lugs Note There is still a blue wire connected to the insulated terminal lug Connect the 5 20 BLUE wire connected to hole V on the circuit board to the insulated lug of the terminal strip DO NOT solder yet Connect the supplied ...
Страница 3: ...3 ...
Страница 4: ...esistor D1 D8 1N5408 Diodes R9 1Ω 3 Watt Resistor R1A R6B 82kΩ 3 Watt Resistors R11 R24 1MΩ Watt Resistors R7 910Ω 2 Watt Resistor HARBACH ELECTRONICS LLC Jeff Weinberg W8CQ 468 County Road 620 Polk OH 44866 9711 419 945 2359 http www harbachelectronics com info harbachelectronics com 4 ...
