Har-Tru CourtPac, Руководство пользователя, Страница: 7 / 12

7
4. Turn engine switch to ON.
5. Turn engine fuel valve to ON.
6. Engage engine choke.
7. Pull-start engine.
Operating the Roller
1. Release the park brake. Be sure the engine choke is not engaged when
operating the roller.
2. Push the control lever slowly in the desired direction and the roller will
start to move.
3. Slowly increase speed to prevent front roller from pulling tennis court
surface material.
4.
Continue to push lever in the desired direction until desired speed is
reached. For optimal use of the unit, you do not need to operate throttle at
highest level. A mid-range level is recommended.
Slowing and Stopping the Roller
1. To slow roller, move the forward/reverse lever toward NEUTRAL.
2. To stop the roller, move the forward/reverse lever directly to NEUTRAL.
Parking and Leaving the Roller
1. After stopping the roller, set the brake before leaving the machine.
2. Turn the engine ON/OFF switch to the OFF position.
P
ERFORMANCE
I
NSPECTION
After reading the instructions and familiarizing yourself with the controls, take
the roller for a test drive. Use the following list as a guide to check your new
roller. Any problems should be corrected before operating the roller.
 Park Brake – When engaged and latched, the roller should be unable
to move.
 Emergency Shut Off Switch – While engine is operating, push down
on emergency shut off button to ensure engine stops.
 Emergency Seat Switch – While engine is operating and transmission
is slightly engaged, slightly raise your body off the seat to ensure
motor stops if operator leaves the seat while transmission is in gear.