HAPRO Luxura X10, Руководство пользователя

Страница: 14 / 144

- 14 -
1 Qsens init
2 Init time
3 Delay 1
4 Timer 1
No
255
3
10
Qsens settings menu
Qsens initialisation:
Scroll to change the setting.
Yes: Qsens initialisation starts equally and stops only when the setting is changed.
No: Qsens does not initialise or stop.
Press ‘Start’, the setting will be saved and the ‘main settings’ menu will appear.
Press ‘Stop’, the setting will not be saved and the ‘main settings’ menu will appear.
This is when the Qsens pipes are filled with water and air pressure.
Initialisation should only be stopped once the Qsens is spraying in a continuous flow, without
interruption.
Select Qsens init. ( 1 )
1 Qsens init
2 Init time
3 Delay 1
4 Timer 1 No
255
3
10
Qsens settings menu
Initialising time:
Scroll to change the setting. ( 0 - 255 sec)
Press ‘Start’, the setting will be saved and the ‘main settings’ menu will appear.
Press ‘Stop’, the setting will not be saved and the ‘main settings’ menu will appear.
This can be used to indicate the duration of the initialisation.
Select Init time. ( 2 )
Note:
A. Initialisation should be stopped once ‘Init time’ reaches 255. Do so by pressing ‘Stop’.
B. The maximum initialisation time is 10 minutes.
1 Qsens init
2 Init time
3 Delay 1
4 Timer 1 No
255
3
10
Qsens settings menu
Delay time:
This is the delay time between start and spray time.
Select Delay 1. ( 3 )
5
6
5
6