Page 8 of 10
Step 9: Insert the slats (17) to hardware parts M and N then press into the base making sure they are
secure.
Step 10:
Assemble the bed base on the right & left hydraulic frame and fix bolts
L starting from ' 1 ' to ' 3 ' as
shown and fix the support leg (16) to the bed base as shown and than stick it the self adhesive S as shown.
Important note : Do not tighten the bolts yet!, and this assemble must be done by two persons.
M
N
17
Vendor: S000307
L
16
3
2
1
S
S
