Page 8 of 12
N
O
16
Step 7: Insert the slats (16) to hardware parts N and O then press into the base making sure they are secure.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 10:
Assemble the bed base on the right & left hydraulic frame and fix bolts
M starting from ' 1 ' to ' 3 ' as
shown and fix the support leg (15) to the bed base as shown and than stick it the self adhesive V as shown.
Important note : Do not tighten the bolts yet!, and this assemble must be done by two persons.
M
15
3
2
1
V
V
Left
Right
