3. If fitting onto a divan bed base, locate the
headboard holes at the end of the base.
4. With the bolt screws (provided with the
bed-base and not the headboard), press
the bolt screws into the base holes until
meeting resistance.
Proceed to screw the bolt screws clockwise,
leaving enough space for the headboard
struts to fit into place.
2.
Align the struts and the
holes correctly on the
bottom-half of the
headboard.
With the four screws
supplied, fasten the struts in
position.
The headbaord is now ready
to fasten to the bed base.
5. Once the headboard is at the desired
height, tighten the bolt screws until the
headboard is locked in place.
(Please note: 5ft King Size and 6ft King Size
bases usually come with 4 bolt screws,
whereas the other smaller sizes will come
with only 2 bolt screws)
If you have problems assembling or have damaged or missing
pieces, please contact us by visiting:
https://www.happybeds.co.uk/customer-service
Fitting onto a base
2.
