Happybeds Hannover Ottoman Bed 5FT, Руководство по сборке

Страница: 3 / 7

Important for Ottoman and other
gas lift beds
www.happybeds.co.uk
Note:
The bed base is in the upright position when first assembled as the gas lifts are fully
extended during shipment for safety. After assembly a firm downward push will be required
to overcome any resisitance in the gas lifts as these may initially stick. We suggest placing
a mattress on top of the bed base to aide this and also test the operation of your new lift up
bed by lifting and pushing down the bed base a few times to allow the lfting mechanism to
bed in.
The lift mechanism provides assistance with the lift of the mattress fitted to the base. It does
not lift the mattress for you. The system has been designed to effectively lift the base
system fitted with a variety of mattress weights and combinations of depths. Depending on
the combination of the mattress weight and depth determines the degree of assistance
provided by the mechanism.
Following the installation of the mechanism lift, pull the base up and down a few times to
free off the system. The gas cylinders fitted to the system may be stiff when first used or if
the system has not been operated for a period of time.
Use the strap handles to lift up the mattress base using two hands. Pull the mattress base
down using two hands equally spaced from the centre of the mattress base. DO NOT pull
down on one side of the base only as this is likely to damage the base system with potential
failure of the mattress base system and lift mechanism.
Do NOT operate the lift up mechanism without the mattress placed on the base.
Caution:
Do NOT allow children to operate the lift mechanism.
Do NOT allow children near the lift base when operating the mechanism.
Do NOT allow children in the area of the internal storage base.
Keep hands clear of the mechanism when operating the base system.
Do NOT stand inside the bed or the internal storage base.
Do NOT overload the internal storage base.