8
www.happybeds.co.uk
Feb 2019 - E&OE - V.1
6. Carefully flip the bases so that they
are now resting atop the gliders, firmly
pressing down on each corner of the
bases to ensure that they are stable.
7. Locate the link bar holes where the two
straight sides of the bases meet. They
should be located near the top of the
bases.
8. (You may need to feel with your finger, as
the holes will be hidden under the fabric,
and may not be marked).
9. Place the link bar along these holes and
screw in the nuts. It is advised that the
right hand side of the link bar (the side
with a smaller hole) is screwed in first
so that the larger hole on the left can be
adjusted if required.
10. Complete screwing the nuts into both
sides of the bases.
11. Locate the headboard stickers on either
end of the bases.
12. Decide which end the headboard will
attach to and pierce the centre of the
stickers.
(Please Note: This action is irreversible,
so please be sure of which end the
headboard will attach.
DO NOT PIERCE
BOTH SIDES!
)
If you have a headboard to attach (or have an existing one)...
