Vendor: S000053
Step 5
: Push hardware part (E) into the mid support (5), then place hardware part (F) onto the end of each slat (7).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 6
: Insert the slats (7) to hardware part (E) and press firmly into the side supports (3). Finally insert hardware part (I) to the
headend (1) and footend (2).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
E
5
F
7
I
I
I
E
7
5
