G
2x
10
14
Step 7:
To assemble part D, it is a must to make sure the hole go into the right position as shown in (NOTE). And before tighten
the screw, please make sure part G is in same alignment in between left and right side of part G.
DO NOT
use any power tools as this may damage the bed frame and will invalidate any claims.
Page 8 of 10
* Please insert the screw balance in the middle of the hole.
D
G
12
7
D
Do Not Use Power Tools
7 JCBC M8 x 45mm
6 pcs
10 M8 Hex Nuts
6 pcs
12 Allen Key M5
1 pc
14 M8 Spanner
1 pc
Top View
