-8-
-9-
Note:
Bluetooth connection range in 10 meters;
The model Sound Piece mini in your
device was not deleted;
After 15 minutes in AUX in mode without
music playback status , the speaker go to
sleep status and you need to hold down
[STANDBY] button for 3 seconds to going to
standby status,then press [STANDBY]
button to wakes up the speaker.
clear the paired memory history by
pressing 'standby' button for 2 times and the
speaker would not repaired automatically .
BLUETOOTH CONNECTION
The bluetooth pairing model of the
speaker is Sound Piece mini , power on the
speaker then use your smart phone to
search the bluetooth signal of the unit, the
unit will synchronize to play songs on your
smart phone while they connected
successfully.
The speaker need to input the password
0000 when the matching bluetooth device
under version 2.1.
The bluetooth speakr will turn to standby
status after 15 minutes without bluetooth
connections, at this time , the bluetooth
speaker will emit the voice of
Power Off.
press [STANDBY] button to wakes up the
speaker.
When the operation too frequently or other
reason to disturb the bluetooth reconnected,
please use manually connect on the
bluetooth device.
The bluetooth is connected to your smart
phone successfully for the first time,
disconnect the bluetooth on your smart
phone then reconnected it, the speaker will
memories your smart phone and repaired
automatically.
Bluetooth Model:
Sound Piece mini
TROUBLESHOOTING
-10-
No power
Music is not
playing over
bluetooth
Bluetooth
device will not
reconnect with
the speaker
Try and power the
bluetooth speaker using
a different outlet or check
the connection of the DC
adapter.
Make sure your bluetooth
device has A2DP.
Check if both devices are
paired and connected
over bluetooth.Restart
the bluetooth speaker to
reconnect your bluetooth
device.
Navigate to your bluetooth
settings menu on your
bluetooth device, tap
”,
and select
“
“Forget”.now follow the steps
to pair your device again.
Sound
Piece mini
means that your electrical and
electronic equipment should be
desposed at the end of its life separately
from your household waste.
There are separate collection systems
for recycling in the EU. For more
information, please contact the local
authority or your retailer where you
purchased the product.
Industry Canada Notice
This device complies with Industry Canada
license-exempt RSS standard(s).
Operation is subject to the following two
conditions:
(1) this device may not cause interference,and
(2)this device must accept any interference,
including interference that may cause
Undesired operation of the device.
This Class B digital apparatus complies with
Canada ICE-003.
CAN ICES-3(B)/NMB-3(B)
FCC STATEMENT:
1.This device complies with part 15 of the FCC
Rules.Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference.
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
2.Changes or modifications not expressly
approved by the party responsible for
compliance could void the user
’s
authority to
operate the equipment.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate
radio frequency energy and,if not installed and
used in accordance with the instructions , may
cause harmful interference to radio
communications.
However, there is no guarantee that
interference will not occur in a particular
installation . If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the seperation between the equipment
and receiver.
Connect the euipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
RF warning statement:
The device has been evaluated to meet general
RF exposure requirement . The device can be
used in portable exposure condition without
restriction.
-11-
-12-
-13-
IC:10485A-BL5601
- French:
Le présent appareil est conforme aux CNR d'Industrie
(1) l'appareil ne doit pas produire de brouillage, et
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes :
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement."
