Alert Stresslocator Oximeter – User's guide version 2
Advice and warnings
Do not use the oximeter nearby sources of strong magnetic resonance.
Do not use the device and a blood pressure monitor with a cuff on the same arm at the same
time.
To ensure proper functioning, keep the device clean.
For precise measuring, your finger must be clean.
The following factor may reduce the accuracy of the measurement:
o
blinking or very strong light
o
strong transmitters (e.g. television, radio) may affect precesion of the oximeter
o
low perfusion
o
low hemoglobin level
o
hypotension, severe vasoconstriction, severe anemia or hypothermia
Use the SpO2 sensor delivered with the device or a sensor which the manufacturer has
approved. As a user, you are responsible for checking the compatibility.
Do not use in flammable environment.
Do not use in an environment that does not fulfill the operating and storage requirements.
The Alert Stresslocator Oxieter is fragile, try to avoid any strong pressure, knock or
vibration that could damage it.
The device is not made of any health damaging materials.
The package of the device is recyclable and must be handeled in accordance with local laws.
All unrecyclable parts of the StressLocator Oximeter must be handeled in accordance with
local laws.
First start
Directions for use
1. Plug the sensor into the body of the oximeter
2. Turn the device on by pressing the power button
3. Fix the sensor on patient's finger as shown on the image below
4/6
