A. Take the table legs (2) and chair legs (5) and slot together
to make a cross.
B. With the chair back (4) slot in the chair base hole (3), then insert
2 screws (6) to secure. Repeat this on both chairs.
C. Insert the locator pin (7) into the holes on the table top (1)
and the chair bases (3) and locate onto these the table & chair
legs, then push in the locator and tighten with a screw driver.
A
B
C
3
(2) + (5)
(3)
(4)
(3)
(4)
(6)
8
(2) + (5)
(7)
(1) + (2)
(2) + (5)
(2) + (5)
