Page 10 of 10
Note: Be very careful what you
store under the bed - the top of an
item, like a suitcase or a box,
must
not touch the slats or the
y may be
damaged.
Maximum storage height is 265mm.
1 Before lifting the slat frame, place your mattress on top of the slats as without a mattress in place the speed of
movement is quick and may cause injury so be careful.
2 Carefully lower the frame with the hand-strap ensuring the frame sides are aligned with the side rails; there should
be an even gap on each side, If not aligned, check bed is still square and if it is, but gaps are still not even,
re-align the slat frame,.
3 Depending on the weight of the mattress, the rising speed will vary so be careful until you get used to the speed.
Alway use the strap to lift or lower the frame - keep fingers well away from the moving parts.
4 To help prevent any accidental entrapment, please make certain the ottoman is lifted right to the top of it's travel
before putting in or retrieving an item from the storage area.
5 When finished, slowly lower the frame back to the lower rest position using the hand strap only.
When fully assembled and with the mattress in position, please raise & lower the ottoman
4/5 times to ensure the gas pistons are fully lubricated.
L
14
W
H
4.5
3
3
5.7
2.2
Slat width
5.3
4.5
3
1.2
Floor to top
of slat
Top of side rail
to top of slat
Overall Dimensions (LWH cm)
Double:
209.5 x
150 x 120
King:
219.5
x 165 x 120
Super King:
219.5
x 195 x 120
Storage Dimensions (LWH cm)
Double:
193 x137.5
x
26.5
King:
203 x152.5 x 26.5
Super
King:
203 x182.5 x 26.5
Distance between slats (cm)
Double: 9
King & Super King: 8.7
Ottoman Piston Rating
Double
,
King
: 750
n
Super King:
900
n
Slat Dimensions (LWH cm)
Double:
67 x 5.3 x 0.9
King: 74.5 x 5.3 x 0.9
Super King:
60.5 x 5.3 x 0.9
