Step 2
• Carefully remove the foot end from carton 1, remove the Hardware Box and all extra
transportation packaging from inside.
• To do this you will need to gently lay the foot end on it's back. Before doing so please
ensure the area is completely free of anything that may cause damage or press into the
fabric. Place a protective cover on the floor to avoid possible damage.
• The controls and hardware are held in place by string please carefully cut these and
remove.
Hardware Box
CAUTION:
PLEASE USE SCISSORS TO CUT
THE STRING.
TAKE CARE WHEN REMOVING
THE ACCESSORY BOXES NOT
TO CATCH YOUR HANDS ON
THE SIDES.
(
r,. r,. Cm
On
8 8 8
0
@) @)
� r,.()=()n8880@@
,--------------------,
I
YOUR TELEVISION REAR VIEW
I
I
HDMI CABLE PLUG POSITION POSSIBLE SCENARIO'S
I
I
I
90 Degree HDMI
cable adaptor
I
Aerial connection
I
I
_____ J
Attention Please Note : Connecting Your HDMI or :
Aerial Cable as shown in diagram (X) can seriously
1
Damage Your TV sockets.
1
To reduce this possibility we have supplied 90 degree
1
adaptors for both HDMI and Aerial connections.
1
�
I
I
I
This will reduce the cable protrusion and lessen the
1
possibility of the cable colliding with the bed frame.
1
These can be found in the bed frame hardware pack
1
located in Box 1 (foot end).
Please refer to the
1
diagram above for the correct fitting of cables. More
1
detailed information can also be found on step 12 of
1
your assembly instructions.
I
The manufacturer or retailer will not accept
responsibility for any damages arising from
incorrect installation.
I
I
I
I
L--------------------�
ATTENTION! PLEASE NOTE:
In the event you are experiencing any technical difficulties and you require additional assistance/ support
with your product 'Mechanical/ Electrical' function - Please contact:
SUPPORT EMAIL :
UK PRODUCT SUPPORT HOTLINE :
01462600064
Contact your retailer for all other issues such as damage, missing or faulty components ( non electrical )
or anything else of a non technical/electrical nature.
