Haobonder MAI-8525, Руководство пользователя

Страница: 3 / 20

All Rights Reserved. The information in this document is subject to change
without prior notice in order to improve the reliability, design and function. It
does not represent a commitment on the part of the manufacturer. Under no
circumstances will the manufacturer be liable for any direct, indirect, special,
incidental, or consequential damages arising from the use or inability to use
the product or documentation, even if advised of the possibility of such
damages. This document contains proprietary information protected by
copyright. All rights are reserved. No part of this manual may be reproduced
by any mechanical, electronic, or other means in any form without prior
written permission of the manufacturer.
1.2 About this User's Manual
This User's Manual is intended for experienced users and integrators with
hardware knowledge of personal computers. If you are not sure about any
description in this User's Manual, please consult your vendor before further
handling.
1.3 Warning
Embedded Miniboards and their components contain very delicate
Integrated Circuits (IC). To protect the Embedded Miniboard and its
components against damage from static electricity, you should always follow
the following precautions when handling it :
1. Disconnect your Embedded Miniboard from the power source when you
want to work on the inside.
2. Hold the board by the edges and try not to touch the IC chips, leads or
Circuitry.
3. Use a grounded wrist strap when handling computer components.
4. Place components on a grounded antistatic pad or on the bag that came
with the Embedded Miniboard, whenever components are separated from
the system.
1.4 Replacing the lithium battery